Konica Minolta KIP 7900 - Manual (Page 20)

KIP Unattend Operator Guide
This information is solely for use of KIP Personnel and KIP Authorized Dealers. No part of this publication may be copied,
reproduced or distributed in any form without express written permission from KIP America, Inc. © 2011 KIP America, Inc.
- 18 -
CurrentLogPath=C:\MONPATH1\LOGDIR
Normally selected in Unattend’s CONFIG/MISC menu, this is the defined path that Unattend uses to
write its Log and Roll information. Unattend creates an ASCII-based print log using the naming
convention MonthYear.log (i.e. Jan03.log). It also writes roll information files (rollinfo.dat) to this location.
This path can be defined to point to another
computer on the network, but the KIP Controller will need rights in order to create and modify files on
another computer.
LogFileName=
Some users prefer their own naming structure instead of the MonthYear.log format that Unattend uses to
write the print log. User can define another filename and extension (i.e. printlog.txt). This file will be
written in the Current Log Path as defined in the CurrentLogPath= line. The new Log File does not create
a new file every month, but appends a single file. Note that the MonthYear.log file is still written in
addition to the custom Log Filename.
TempDir=C:\TU
The Directory location where all conversion of files takes place.
LPDSpoolDirectory=
EnhancedWinLPDRead=F
HistoryGB=0
The amount of hard drive space designated for the storing of History Jobs.
MinDoneFileSize=1
MinCutLength=8.5
Allows the technician to set the minimum number of inches for the cut length that will be produced by
the controller when printing. Especially helpful for printing longer Trim Sheets or Error Pages, that may
jam the printer when the curl of the media causes problems. (Suggested MINCUTLENGTH=17)
DefaultMedia=Bond
SepMedia=BOND
LastPen=C:\PROGRAM FILES\KIP\REQUEST\PENS\DEFAULT.PEN
The last pen table used for printing.