Konica Minolta KIP 7900 - Manual (Page 28)

KIP Unattend Operator Guide
This information is solely for use of KIP Personnel and KIP Authorized Dealers. No part of this publication may be copied,
reproduced or distributed in any form without express written permission from KIP America, Inc. © 2011 KIP America, Inc.
- 26 -
StatusExe=C:\PROGRAMS\KIPSTAT.EXE
VectorInExe=C:\PROGRAMS\DS\MH2.EXE
RasterInExe=C:\PROGRAMS\DS\MTF.EXE
TlcPrintExe=C:\PROGRAMS\DS\MTP.EXE
ViewExe=
TiffViewExe=
QuickViewExe=C:\PROGRAM FILES\KIP\REQUEST\QV.EXE
RequestExe=C:\PROGRAM FILES\KIP\REQUEST\WINREQ.EXE
MergeExe=C:\PROGRAMS\DS\MI.EXE
ColorExe=C:\SCP\KC80_COLOR_ENGINE.EXE
AutoRecognizeExe=C:\PROGRAMS\DS\MAD.EXE
PowerScriptExe=C:\PROGRAMS\DS\PSCRIPT.EXE
NestImageExe=C:\PROGRAMS\MPACK.EXE
KipPortExe=C:\PROGRAMS\KAWPDFT.EXE
DWFExe=C:\PROGRAMS\DS\DWFCONVERT.EXE
BlankPrint=C:\PROGRAMS\TRIMSHT.TLC
ExternalCommandLine=
ExternalDirectory=
[PDFDefaults]
UseImageSize=True
PDFImageSizeX=0
PDFImageSizeY=0
ReverseOrder=False
EnhancedColor=False
PSUsePageSize=True
The above lines refer to default handling of PDF/PS documents if presented through KIP0 using Port
based transfer methods. If using the 6.5 KIP Windows Printer driver, PSUsePageSize must be set to True.
[RasterScaling]
RasterThreshold1=0
RasterThreshold2=0
RasterSetting1=
RasterSetting2=
RasterSetting3=
Added Enhancements to full and half Size Printing of Raster Data – designed to improve full and half size
printing of heavy Raster data. The INI settings allow the technician to specify at what “Raster Density”
the KIP software applies a Dither Pattern and Density Setting. This is very similar to applying a Dither
Pattern and Density Setting to RTL data, but this now applies for Raster Data.
Here’s how the features work: