Konica Minolta KIP 7900 - Manual (Page 33)

KIP Unattend Operator Guide
This information is solely for use of KIP Personnel and KIP Authorized Dealers. No part of this publication may be copied,
reproduced or distributed in any form without express written permission from KIP America, Inc. © 2011 KIP America, Inc.
- 31 -
A2SizeWidthMax=6000
A2SizeWidthMin=550
A2SizeLengthMax=440
A2SizeLengthMin=400
A3SizeWidthMax=6000
A3SizeWidthMin=400
A3SizeLengthMax=320
A3SizeLengthMin=270
A4SizeWidthMax=6000
A4SizeWidthMin=270
A4SizeLengthMax=220
A4SizeLengthMin=200
[MonitorPaths]
RasterMonitorPath1=
VectorMonitorPath1=
RequestMonitorPath1=C:\Monpath1\Request
[WinLpd]
WinLpdMonitorPath1=
WinLpdName1=
[PriorityPaths]
PriorityRequestPath=C:\MonPath1\PRequest
This defined path is used only for jobs coming from KIP Scan’s or KIP CopyMaker’s “Concurrent Print”
mode. When “Concurrent Print” is enabled, the Scan program places a file called prequest.kip in the
root of the Monpath1 folder. When Unattend sees this file, it pauses the normal print queue, and displays
the message “Priority Plots – Idle.” “Concurrent Print” then sends jobs via this defined folder. Unattend
gives priority to these jobs, and remains in this mode until “Concurrent Print” is disabled in the Scan
/CopyMaker program.
[CopyDensityValues]
Dark=12
MediumDark=10
Medium=8
MediumLight=6
Light=5
Printer strobe-timing values. Numbers vary per printer model. Smaller numbers lay down less toner. If
these values are set too high, Unattend will appear to convert the file, but then it will disappear from the
queue. For HDP models (2000, 6000, 7000, 8000), this value cannot exceed 48. For KIP 3000 models, these