Park/pickup key configuration, Key configuration using the aastra web ui, Line keys and softkeys – Aastra Telecom 9480i CT User Manual
Page 117
Model 9480i CT IP Phone User Guide
107
Line Keys and Softkeys
Park/Pickup Key Configuration
The programmable method of configuration creates park and pickup softkeys that you can
configure on the 9480i CT phone.
You can set a softkey as "Park" or "Pickup" and then:
•
specify a customized label to display on the Phone UI
•
specify a value
•
specify which line to use
•
specify the state of the park and/or pickup keys
On the IP phone UI, the Park/Pickup feature displays the following:
•
When a call comes in, and you pickup the handset, the custom label that you configured for the
Park softkey displays on the Phone UI.
•
After the call is parked, the label that you configured for the Pickup softkey displays on other
phones in the network. You can then press the "Pickup" softkey, followed by the applicable
value to pickup the call on another phone in your network.
You can configure a Park and Pickup programmable configuration using the Aastra Web UI.
Key Configuration Using the Aastra Web UI
On the 9480i CT, you configure a Park and/or Pickup key at Operation->Softkeys and XML.
You enter a key label, and value for a specific line on the phone. The default state of the Park
configuration is "connected". The default state of the Pickup configuration is "idle, outgoing".
Note:
Applicable values depend on the server in your network (Asterisk,
BroadWorks, Sylantro, ININ PBX. See the table
on