Empty key, Configuring an empty key, Line keys and softkeys – Aastra Telecom 9480i CT User Manual

Page 144

Advertising
background image

134

Model 9480i CT IP Phone User Guide

Line Keys and Softkeys

Empty Key

You can set a softkey to force a blank entry on the IP phone display for a specific softkey. You do
this by setting the softkey to "empty". The softkeys are added in order (from softkey1 to
softkey20) after any hard-coded keys have been added. If a particular softkey is not defined, it is
ignored.

Configuring an Empty Key

Use the following procedure to configure an Empty softkey on the 9480i CT phone.

1. Click Operation->Softkeys and XML.

Softkeys

2. Select from "Key 1" through "Key 20".

3. In the "Type" field, select Empty.

4. Check (enable) or uncheck (disable) the states you want to apply to this softkey.

5. Click

to save your changes.

Aastra Web UI

Advertising