None key, Configuring a none key, Line keys and softkeys – Aastra Telecom 9480i CT User Manual
Page 143
Advertising
Model 9480i CT IP Phone User Guide
133
Line Keys and Softkeys
None Key
You can set a key to force a blank entry on the IP phone display for a specific key. You do this by
setting the key to "none". The keys are added in order (from key 1 to key 20) after any hard-coded
keys have been added. If a particular key is not defined, it is ignored. For more information about
key behavior, see
.
Configuring a None Key
Use the following procedure to configure a None key on the 9480i CT IP Phone.
1. Click Operation->Softkeys and XML.
Softkeys
2. Select from "Key 1" through "Key 20".
3. In the "Type" field, select None.
4. Check (enable) or uncheck (disable) the states you want to apply to this softkey.
5. Click
to save your changes.
Aastra Web UI
Advertising