Aastra Telecom 9480i CT - Manual (Page 71)

Model 9480i CT IP Phone User Guide 61
Line Keys and Softkeys
Flash Indicates the key is set to generate a flash event when it is pressed on
the 9480i CT. The IP phone generates flash events only when a call is
connected and there is an active RTP stream (for example, when the
call is not on hold).
Sprecode Indicates the key is configured to automatically activate specific
services offered by the server. For example, if the sprecode value of *82
is configured, then by pressing the Sprecode key, *82 automatically
activates a service provided by the server. Contact your System
Administrator for available services.
Park Indicates the key is configured to park incoming calls when pressed.
Pickup Indicates the key is configured to pick up parked calls when pressed.
Last Call Return (lcr) Indicates the key is configured for “last call return” when pressed.
Call Forward Indicates the key is configured as a Call Forward key. When pressed,
the IP Phone UI displays the Call Forward menus.
BLF/Xfer Indicates the key is configured as a simplified BLF key and a transfer
key. You can use this key to perform the BLF function, or you can use it
as a transfer key to transfer calls.
Speeddial/Xfer Indicates the key is configured as a simplified speeddial key and a
transfer key. You can use this key to perform speeddial functions, or you
can use it as a transfer key to transfer calls.
Speeddial/Conf Indicates the key is configured as a speeddial key and a conference
key. You can use this key to speeddial from within a conference call,
and add the new call directly to the conference.
Services Indicates the key is set to access Services, such as, Directory List,
Callers List, Voicemail, or any other XML applications set up by your
System Administrator.
Directory Indicates the key is configured to access the Directory List.
Note: At the idle screen on the phone, you can also press the UP arrow
to enter the Directory List.
Callers List Indicates the key is configured to access the Callers List.
Note: At the idle screen on the phone, you can also press the DOWN
arrow to enter the Callers List.
Intercom Indicates the key is configured to be used for intercom calls.
Phone Lock Indicates the key is configured as a phone lock key, allowing you to
press this key to lock/unlock the phone.
Paging Indicates the key is configured as a Paging key. When pressed, the
phone can send Real Time Transport Protocol (RTP) streams from a
pre-configured multicast address without involving SIP signaling. You
can also receive RTP streams from pre-configured multicast addresses
(can specify up to 5 addresses) using the "Paging Listen Addresses" at
the path, Basic Settings->Preferences->Group Paging RTP Settings
in the Aastra Web UI. For more information about setting this parameter,
see
“Group RTP Paging (receives RTP streams)” on page 250 .
Empty Indicates the key has no function assigned.
Key Function Description