Aastra Telecom 9480i CT - Manual (Page 141)

Model 9480i CT IP Phone User Guide 131
Line Keys and Softkeys
5. To receive RTP steams for Group Paging, you must also configure the "Paging Listen
Addresses" parameter at the path, Basic Settings->Preferences->Group Paging RTP Settings.
For more information about setting this parameter, see
“Group RTP Paging (receives RTP
streams)” on page 250 .
6. Click to save your changes.
Using the Paging Key
The following procedure describes the use of the Paging key on the IP Phone. The procedure
assumes you have already configured the Paging key using the Aastra Web UI.
1. On the IP Phone, press the softkey or programmable key you configured for
Paging (labeled as “Group 1” in the following illustration).
Notes:
1. When you select Paging for the “Type” field, the “Line” field is disabled.
2. The “Value” field allows for one multicast address entry only.
IP Phone UI
Notes:
1. Recipient of a Paging call can set a global “Do Not Disturb” (DND) to ignore
any incoming pages.
2. For incoming Paging, the phone uses the Intercom configuration settings. The
incoming Page is dependant on the “Allow Barge-In” parameter setting and the
“Idling/On Call” state.
Tues Jan1 10:00am
Group 1
LAB
ACD