Pioneer VSX-859RDS-G - Manual (Page 16)

16
En
TV/Satellite tuner
COMPO-
NENT
VIDEO
OUT
VIDEO
STEREO
L
R
DIGITAL ANALOG
DIGITAL
S-VIDEO
Y
P B
P R
TV/ Satellite Tuner Components
Connect your satellite TV components to the jacks as shown below. Hook up the video signal with either
component video (not possible for the VSX-839RDS), S-video, or composite video cords (the quality descends in
this order) but remember, the video component you are watching and your TV must be hooked up with same
type of video cord or you won't be able to see the picture. For the audio signal, order to use digital soundtracks
(sometimes broadcast over digital satellite TV) you must hook up a digital input. Use either a coaxial or optical
cables, it doesn't matter which (you don't need to use both). It's also a good idea to hook up your audio with
analog cables (see below). This connection is called STEREO AUDIO OUT in the diagram.
Before making or changing the connections, switch off the power and disconnect the power cord from the AC
wall outlet.
*The arrows indicate the direction of the TV signal.
Connecting Your Equipment
VSX-859RDS
See the component's instruction manual if you are
unsure about its input and output jacks.
memo
7 S video cords
If you use S video cords (not supplied) to
connect the video components be sure to
insert completely.
(See note on p. 15 if you choose to use S-
video connections.)
S VIDEO