Pioneer VSX-859RDS-G - Manual (Page 31)

31
En
SET
UP
Initial Set up
SETUP
MULTI JOG
(Turn to select / Push to enter)
[
F u n c t i o n e R
R
n ame
]
[ ]
[ ]
[ ]
[ ]
[ ]
[ ]
[
[
]
] EX I T
T
DVD / L D
VCR2
V I DEO
PHONO
CD - R
VCR1
CD
TV / SA T
DV
DV
D /
/
P TA 1 E /
L D
VCR2
V I DEO
PHONO
CD - R
VCR1
CD
TV / SA
3 Press the
5 or ∞ arrow buttons (or turn the
MULTI JOG dial) to move the hand to the
second tier of setup modes and choose the
one you want. Then press the ENTER button
(or the MULTI JOG dial).
There are three second tier setup modes: ASSIGN SETUP,
SURROUND SETUP and FUNCTION RENAME. The first of
these, ASSIGN SETUP, is for telling the receiver which
components are hooked up to which terminals and how they are
connected. In the ASSIGN SETUP menu you must make the
DIGITAL-IN-SELECT adjustments if you didn't follow the default
settings when you hooked up your DVD/LD player.
We suggest you start with DIGITAL-IN-SELECT and adjust and
make all the necessary adjustments here and then move on to
the other entries in this menu and decide if you need to make
these adjustments. It is likely you will not need to bother with any
of the other things on this menu.
Next move on to the SURROUND SETUP menu and make all the
necessary settings. It is essential you make these settings in
order to get good surround sound .
The last set up menu, FUNCTION RENAME, lets you customize
the receiver to match your home system. This is not an essential
setting to make.
The system set up modes are explained on the next page in a
little more detail. The order follows that of the SYSTEM SETUP
menu.