Basic playback – Pioneer VSX-859RDS-G User Manual
Page 48
48
En
Basic Playback
•
If you have SURROUND BACK speaker(s) switched on
(see p. 36 – 37) then 7-D THEATER and 7CH STEREO
will appear as such in the display on the receiver (VSX-
859RDS only). If these speakers are not switched on the
above two modes will appear as 5-D THEATER and 5CH
STEREO.
•
The amount of effect in each ADVANCED THEATER
mode can be adjusted in the range of 10 to 90 by
pressing EFFECT +/– (The default setting is 70). Also,
the effect level can be set in each ADVANCED THEATER
mode by pressing the EFFECT(+/–) button (see p. 25,
26).
•
The amount of effect in each DSP mode can be adjusted
in the range of 10 to 90 (the default setting value is 70)
by pressing EFFECT +/– (see p. 25, 26).
•
5/7CH STEREO modes cannot be adjusted.
memo
DSP MODE
—OFF _ON button
STEREO/
DIRECT
STANDARD
THX CINEMA
ADVANCED