Pioneer VSX-859RDS-G - Manual (Page 67)

67
En
Using the Tuner
OPERA
TION
Using EON search (front panel only)
Refer to p. 64 for more information about EON.
1 Tune into an EON FM station.
Refer to “Automatic and Manual Tuning” or “Direct Access
Tuning” on p. 58 and 59.
• Even if the EON mode is off, when an FM station is broadcast-
ing a news of traffic information program, the EON ( ÷) indicator
lights in the display to inform you that the currently tuned
station carries the EON data service.
2 Press the EON MODE button to select the
EON mode.
Each press changes the display as follows:
EON TA EON NEWS OFF
• When EON is set to OFF, the frequency being received will be
displayed, and then the RDS data will be displayed in the present
display mode.
• The EON mode is canceled if you switch to AM reception while
setting EON. Start once again after you return to FM reception.
• Simultaneous requests for Traffic Information (TA) and News
programs is not possible.
• When you are playing back TAPE 2 while setting EON, TAPE 2 will
be canceled by reception of EON. The function returns once more to
TAPE 2 after EON reception is finished.
• When EON is turned on and a function other than the tuner is
selected, the function will switch to the FM station automatically
when Traffic Information or News begins. When the program ends,
the original function will be restored.
• You cannot operate the MEMORY and CHARACTER/SEARCH
buttons while the EON indicator in the display lights.
• Functions other than TUNER cannot be changed while the EON (
÷)
indicator in the display blinks (while receiving EON broadcast). If you
want to change to a source other than TUNER, press the EON
MODE button and turn the EON mode off.
• When EON is ON, the EON indicator lights. During reception of news
or traffic information broadcast the EON (
÷) indicator blinks.
memo
2