Pioneer VSX-859RDS-G - Manual (Page 6)

6
En
Quick Start Guide
4 4 4 4 4 Digital Input Assignment (VSX-839RDS)
This is only necessary if you did not hook up your DVD to DIGITAL IN 1, as in the diagram on p. 3.
1 Press the RECEIVER.
This switches the remote to the surround Set up
mode.
2 Press the SYSTEM SETUP button.
You should see the following display on your
receiver.
• You can escape from this screen at any time
by pressing the SYSTEM SETUP button
again. None of the settings you made will be
entered in this case.
3 "Assign Set" should be selected (if it
isn't use the
5¥∞ buttons to select
it). Press ENTER.
You should see the following display on your
receiver.
4 "Digital in" should be selected (if it
isn't use the
5¥∞ buttons to select
it). Press ENTER.
You should see the following display on your
receiver.
5 Choose the "Digital-3" (or the digital
in jack you connected your DVD to
on page 3) with
5¥∞ buttons you
hooked up your DVD player to.
Press ENTER.
6 Choose the "DVD/LD"(if it isn't use
the
5¥∞ buttons to select it). Press
ENTER.
7 Select "Dig-In End" with
5¥∞
buttons and press ENTER to return
to the Dig-In Setup menu.
8 Select "Assign End" with
5¥∞
buttons and press ENTER to return
to the Assign Setup menu.
9 Select "Setup End" with
5¥∞
buttons and press ENTER to return
to the System Setup menu.
TOP MENU
SOURCE
LOUDNESS
INPUT ATT DIGITAL NR FL DIMMER
REMOTE SETUP SYSTEM SETUP SIGNAL SELECT
TV VOL TV
TVFUNK
D.ACCESS BAND
MENU
CLASS
CHANNEL
EFFECT/CH SEL
RECEIVER
TV CONTROL
MASTER VOLUME
VIDEO SELECT
MULTI CONTROL
MULTI CH INPUT
DVD
CD CD-R TUN TVC
RECEIVER
1 2 3
4 5 6
7 8 9
0
* ‹ &
TV VCR
1 VCR
2
4 ¢
ENTER
TUNE
TUNE
ST ST
2
1
3-9
DISC +10