The system setup and other setup menus, 1 switch on the receiver and your tv, 2 press , then press home menu – Pioneer VSX-920-K User Manual
Page 100: 4 select the setting you want to adjust, Manual speaker setup, Caution, 11 the system setup and other setup menus, The system setup and other setup menus 11, Chapter 11
The System Setup and Other Setup menus
11
100
En
Chapter 11:
The System Setup and Other
Setup menus
Making receiver settings from
the System Setup menu
The following section describes how to change
the speaker-related settings manually and
make various other settings (input selection,
OSD language selection, etc.).
1
Switch on the receiver and your TV.
Use the
RECEIVER button to switch on.
1
• If headphones are connected to the
receiver, disconnect them.
2
Press
, then press HOME MENU.
A Graphical User Interface (GUI) screen
appears on your TV. Use
/// and
ENTER to navigate through the screens and
select menu items. Press
RETURN to confirm
and exit the current menu.
• Press
HOME MENU at any time to exit the
Home Menu.
3
Select ‘System Setup’ from the Home
Menu, then press ENTER.
4
Select the setting you want to adjust.
•
Manual SP Setup – Sets the type of
connection used for surround back
terminals and the size, number distance
and overall balance of the connected
speakers (see Manual speaker setup below).
•
Input Setup – Specifies what you’ve
connected to the digital, HDMI and
component video inputs (see The Input
Setup menu on page 42).
•
OSD Language – The GUI screen’s display
language can be changed (see Changing
the OSD display language (OSD Language)
on page 39).
•
Network Setup – Conducts the setup
necessary to connect this unit to the
network (see Network Setup menu on
page 104).
•
Other Setup – Changes customized
settings to reflect how you are using the
receiver (see The Other Setup menu on
page 106).
Manual speaker setup
This receiver allows you to make detailed
settings to optimize the surround sound
performance. You only need to make these
settings once (unless you change the
placement of your current speaker system or
add new speakers).
These settings are designed to customize your
system, but if you’re satisfied with the settings
made in Automatically conducting optimum
sound tuning (Auto MCACC) on page 39, it isn’t
necessary to make all of these settings.
CAUTION
• The test tones used in the
Manual SP Setup
are output at high volume.
Note
1 Make sure not to switch off the power when using the System Setup menu.
RECEIVER
VSX-1020_SYXCN.book 100 ページ ２０１０年３月１２日 金曜日 午前９時１０分