Pioneer VSX-920-K - Manual (Page 54)

Basic playback 05
54
En
4 Select ‘Pairing Bluetooth Device’, then
press ENTER.
5 Select the ‘Passcode’ setting you want.
Select the same passcode as the Bluetooth
wireless technology device you wish to
connect.
• 0000/1234/8888 – Select the passcode
from these options. These are the
passcodes that can be used in most cases.
• Others – Select to use a passcode other
than those mentioned above.
6 If you selected Others in step 5, enter the
passcode.
Use
/ to select a number and / to
move the cursor.
7 Follow the instructions displayed on the
GUI screen to conduct pairing with the
Bluetooth wireless technology device.
Switch on the Bluetooth wireless technology
device that you want to make pair, place it near
the receiver and set it to the pairing mode.
8 Check to see that the Bluetooth ADAPTER
is detected by the Bluetooth wireless
technology device.
When the Bluetooth wireless technology device
is connected:
CONNECTED appears in the receiver display. 1
When the Bluetooth wireless technology device
is not connected:
Go back to the passcode setting in step 5. In
this case, perform the connection operation
from the Bluetooth wireless technology device.
9 From the Bluetooth wireless technology
device list, select Bluetooth ADAPTER and
enter the Passcode selected in step 5.
2
Listening to music contents of a
Bluetooth wireless technology
device with your system
1 Press ADAPTER on the remote control to
switch the receiver to ADAPTER PORT input. 3
2 Perform the connection operation from
the side of the Bluetooth wireless technology
device to the Bluetooth ADAPTER.
3 Start playback of music contents stored
on the Bluetooth wireless technology device.
This receiver’s remote control buttons can be
used for basic playback of files stored on
Bluetooth wireless technology devices.
4
The Bluetooth
®
word mark and logos are
registered trademarks owned by Bluetooth
SIG, Inc. and any use of such marks by Pioneer
Corporation is under license. Other
trademarks and trade names are those of their
respective owners.
Note
1 The system can display alphanumeric characters only. Other characters may not be displayed correctly.
2 The passcode may in some cases be referred to as “passkey” or PIN code.
3 When the Bluetooth ADAPTER is not plugged into the
ADAPTER PORT, NO ADAPTER will be displayed if ADAPTER
PORT input is selected.
4 • Bluetooth wireless technology device should be compatible with AVRCP profile.
• Depending on the Bluetooth wireless technology device you use, operation may differ from what is shown in the
remote control buttons.
S.RETRIEVER MIDNIGHT
TV / DTV MPX PQLS
PHASE CTRL STATUS
PGM MENU
AUDIO
HDD DVD
2 1 3
VSX-1020_SYXCN.book 54 ページ ２０１０年３月１２日 金曜日 午前９時１０分