Pioneer AVIC-S1 - Manual (Page 102)

User's manual AVIC-S1
- 100 - Displayed Information
8.7.7 Waypoint Info
Waypoint Info This information is only visible if you are navigating a route that
has at least 2 waypoints.
With this setting you establish whether the distance left until you
reach the next waypoint and, depending on setting, the probable
arrival time or the remaining driving time should be shown.
(Refer to "Displayed Time", page 100)
The current setting is shown on the button. Tap on the button in
order to to change the setting.
Setting Meaning
Show The waypoint information is shown.
Hide The waypoint information is not shown.
8.7.8 Displayed Time
Displayed Time If you have set the display of destination information and
waypoint information you can use this setting to establish which
information should be shown in addition to the distance. (See
Destination Info, page 99 and Waypoint Info, page 100)
The current setting is shown on the button. Tap on the button to
change the setting.
Setting Meaning
Arrival The estimated time of arrival is shown
above the distance display.
Duration The remaining driving time is shown above
the distance display.
8.7.9 Street names on map (2D)
Street names on
map
With this setting you establish whether the street names should
be shown on the map. This display can be useful if you are
looking for a specific street as a destination.
The current setting is shown on the button. Tap on the button to
change the setting.
Setting Meaning
Show The street names will be shown.
Hide The street names will not be shown.