Pioneer AVIC-S1 - Manual (Page 111)

User's manual AVIC-S1
Configuring AVIC-S1 - 109 -
8.14 Regional Settings
Regional Settings In the R EGIONAL S ETTINGS window you can change the basic
settings, e.g. language and time zone, that you specified when
you first started the navigation system (refer to Basic settings,
page 13).
1. Tap on the Regional Settings button.
The R
EGIONAL
S
ETTINGS
window opens.
In the R EGIONAL S ETTINGS window you can carry out the
following settings:
8.14.1 Language
Language With this setting you specify the language the user interface of
the software and the spoken driving directions should be.
The current setting is shown on the button.
1. Tap on the button to open the L
ANGUAGE window.
2. Tap on the language in which you wish to operate the system.
You can scroll through the list using the Up and Down keys.
As soon as you tap on the language an information window
opens that informs you that need to restart the machine.
3. Tap on the OK button.
The system switches off and then back on again. The chosen
language is used for the user interface and the speech
instructions.