Pioneer AVIC-S1 - Manual (Page 20)

User's manual AVIC-S1
- 18 - Hardware keys
3.1 Hardware keys
Hardware Keys The following hardware keys are located on the front of the
device. You use these to quickly access the most important
functions:
Left Key
Position in map
Opens the map in the standard view and displays your current
position.
Toggles between 2D and 3D view when your current position is
being displayed (i.e. when GPS-signals are being received).
Centre
Scrolling wheel
Your device has a little wheel that can be turned up and down
and also pressed.
In a list:
Turn the wheel upwards / downwards and the previous /
following entry in the list is selected.
Press on the centre of the wheel to accept the selected entry.
In map view:
Turn the wheel upwards to increase the volume of the driving
instructions.
Turn the wheel downwards to reduce the volume of the driving
instructions.
Press on the centre of the wheel to open the A
DDRESS BOOK .
Right Key
Press briefly when the map is open:
Opens the D ESTINATION window.
Press briefly when the map is not open:
Opens the map at the same point at which it was closed.
Press longer:
Brings the telephone application to the foreground.
Briefly press in the telephone application:
The navigation software is brought to the foreground.
Switch device on /
off
The button to switch the device on and off is located on the top
of the device.
Switch on / off button
Long push:
Switches the device on / off.