Pioneer AVIC-S1 - Manual (Page 87)

User's manual AVIC-S1
Traffic Messages - 85 -
7.3 TMC categories
Overview Traffic reports that are sent via TMC are always assigned certain
categories. Not all categories concern jams or obstacles that can
cause jams.
You can set from which categories you wish to have reports.
Setting TMC
categories 1. Open the T RAFFIC window. (refer to page 82)
2. In the T RAFFIC window, tap on the Traffic Settings button.
The T RAFFIC S ETTINGS window opens.
The TMC report categories are listed. You can scroll through the
list using the Up and Down buttons.
Each category shows the symbol that will be shown when there is
a report from this category.
A tick shows that the respective category will be shown.
No tick for a category means:
Ù Reports for this category do not appear on lists of traffic
reports.
Ù Reports for this category will not be shown on the map.
Ù Reports for this category will not be taken into consideration
in the route calculation.
Show category / do
not show category 1. Tap on a category in order to add or remove the tick.
2. Perform this step for each category that you wish to change.
Close configuration Tap on the Back button in order to close the T RAFFIC S ETTINGS
window and return to the T RAFFIC window.