Pioneer AVIC-S1 - Manual (Page 60)

User's manual AVIC-S1
- 58 - Itinerary (with waypoints)
4.5.6 Calculating the route
A planned routed can also be calculated without GPS reception so
that you can get an overview of the route.
In doing so, the first specified waypoint is assumed as the
starting point of the route.
Note: During navigation the current standing point is the starting
point. The first stage is then the drive to the first specified
waypoint.
1. Tap on the Done button in order to calculate the entire route
as well as the foreseeable duration of journey.
Note: For the route calculation to the entered destination the
settings will be taken into consideration that have been entered
in the settings window of the R
OUTE P REFERENCES window.
To do this, refer to chapter "Route Preferences", page 94.
The route is calculated. A window informs you of the progress
of the calculation.
As soon as the route is calculated, the map opens and the
route is displayed in the map.
The route is highlighted in green.
The specified waypoints are labelled with little flags.