Pioneer AVIC-S1 - Manual (Page 15)

User's manual AVIC-S1
Using the Navigation System for the First Time - 13 -
2.2 Switching on the navigation system
As soon as you have connected the navigation system to the
power supply you can start to use it for the first time.
1. Slide the main switch on the back of the device to ON.
If the main switch is already switched to ON, then press the
On/Off button on the top of the device.
The PIONEER start screen appears briefly during start-up.
At the first start the following message appears:
2. Read the message, and touch OK if you agree with the
written warning.
2.3 Basic settings
Basic Settings When you start AVIC-S1 for the first time, you will be asked
Ù to specify the language in which you would like to operate the
navigation system,
Ù for the time zone valid for your location, this was you can
correctly state arrival times, and
Ù to specify the desired format for the time (12hr/24hr) and
distances (km/mi).