Receiving traffic announcements 22, Using pty functions 22, Operating this unit – Pioneer DVH-P5000UB User Manual

Page 22: Receiving traffic announcements, Using pty functions

Advertising
background image

Limiting stations to regional
programming

When AF is used, the regional function limits
the selection of stations broadcasting regional
programs.

1

Use MULTI-CONTROL to select

REGIONAL in the function menu.
Refer to Introduction to advanced operations
on page 20.

2

Press MULTI-CONTROL to turn the re-

gional function on.

# To turn off, press MULTI-CONTROL again.

Notes

! Regional programming and regional networks

are organized differently depending on the
country (i.e., they may change according to
the hour, state or broadcast area).

! The preset number may disappear from the

display if the tuner tunes in a regional station
which differs from the originally set station.

! The regional function can be turned on or off

independently for each FM band.

Receiving traffic announcements

TA (traffic announcement standby) lets you re-
ceive traffic announcements automatically, no
matter what source you are listening to. TA
can be activated for both a TP station (a sta-
tion that broadcasts traffic information) or an
enhanced other network

’s TP station (a station

carrying information which cross-references
TP stations).

1

Tune in a TP or enhanced other net-

work

’s TP station.

TP indicator lights.

2

Press TA to turn traffic announcement

standby on.

# To turn off, press TA again.

3

Use MULTI-CONTROL to adjust the TA

volume when a traffic announcement be-
gins.
The newly set volume is stored in memory and
recalled for subsequent traffic announce-
ments.

4

Press TA while a traffic announcement

is being received to cancel the announce-
ment.
The tuner returns to the original source but re-
mains in the standby mode until

TA is pressed

again.

Notes

! You can also turn this function on or off in the

menu that appears by using
MULTI-CONTROL.

! The system switches back to the original

source following traffic announcement recep-
tion.

! Only TP and enhanced other network’s TP sta-

tions are tuned in during seek tuning or BSM
when TA is on.

Using PTY functions

You can tune in a station by using PTY (pro-
gram type) information.

Searching for an RDS station by PTY
information

You can search for general types of broadcast-
ing programs, such as those listed on the next
page.

Operating this unit

En

22

Section

02

Advertising