Pioneer DVH-P5000UB - Manual (Page 27)

# If you do not want to play the DivX VOD con-
tent, press g.
CM skip/CM back
This function skips a reproduced image for a
specified time. If the currently playing disc
contains commercials, it is possible to skip
them.
! This function is available for DVD.
% To skip progressively backward or for-
ward, press CM BACK or CM SKIP.
Each time you press
CM BACK or CM SKIP it
changes steps in the following order:
CM back
5 sec.
—15 sec.—30 sec.—1.0 min.—2.0
min.
—3.0 min.
CM skip
30 sec.
—1.0 min.—1.5 min.—2.0 min.—3.0
min.
—5.0 min.—10.0 min.
After displaying the selected option for two
seconds, reproduced image skips.
# If you do not operate the function within about
eight seconds, the display is automatically re-
turned.
Resume playback (Bookmark)
The Bookmark function lets you resume play-
back from a selected scene the next time the
disc is loaded.
To perform this function, set the remote con-
trol to
DVD mode.
! This function is available for DVD video.
% During playback, press BOOKMARK at
the point you want to resume playback
next time.
The selected scene will be bookmarked so that
playback resumes from that point next time.
You can bookmark up to five discs. After that,
the oldest bookmark is replaced by the new
one.
# To clear the bookmark on a disc, press and
hold
BOOKMARK during playback.
# You can also bookmark a disc by pressing and
holding
EJECT at the point you want to bookmark.
Next time you load the disc, playback will resume
from the bookmarked point. Note that you can
only bookmark one disc using this method. To
clear the bookmark on a disc, press
EJECT.
Specifying title
! This function is available for DVD.
! To perform this function, set the remote
control to DVD mode.
% Press 0 to 10 corresponding to a desired
title number when the disc is stopped.
Title number is displayed for eight seconds
and playback starts from the selected title.
! To select 3, press 3.
! To select 10, press 10 and 0 in that order.
! To select 23, press 10, 10 and 3 in that
order.
Specifying track
You can use the search function to specify a
track to search for a desired track.
! This function is available for Video CD.
! During playback of Video CDs featuring
PBC (playback control), this function can-
not be operated.
! To perform this function, set the remote
control to DVD mode.
% Press 0 to 10 corresponding to a desired
track number when the disc is stopped.
Track number is displayed for eight seconds
and playback starts from the selected track.
! To select 3, press 3.
! To select 10, press 10 and 0 in that order.
! To select 23, press 10, 10 and 3 in that
order.
Operating this unit
En
27
Section
02
Operating
this
unit