Pioneer DVH-P5000UB - Manual (Page 47)

Setting up the DVD player
Introduction of DVD setup
adjustments
You can use this menu to change audio, subti-
tle, parental lock and other DVD settings. This
menu can be operated only by using the re-
mote control.
! To perform this function, set the remote
control to DVD mode.
1 Press g.
2 Press MENU when the disc is stopped.
The DVD setup menu is displayed.
3 Move the thumb pad up or down to
display the DVD setup function names.
Move the thumb pad up or down to switch the
following DVD setup functions:
SUBTITLE LANGUAG (subtitle language set-
tings)
—AUDIO LANGUAGE (audio language
settings)
—MENU LANGUAGE (menu lan-
guage settings)
—ASSIST (assist subtitle)—
ANGLE (angle icon) —TV ASPECT (TV aspect)
—PARENTAL (parental lock)—DIVX VOD
(DivX VOD)
—DIVX SUBTITLE (DivX subtitle)—
DIGITAL OUTPUT (digital output setting)
# If you press MENU during display of a DVD
setup menu, the DVD setup menu is canceled
and the unit returns to the previous display.
Setting the subtitle language
You can set a desired subtitle language. If the
selected subtitle language is recorded on the
DVD, subtitles are displayed in that language.
1 Move the thumb pad up or down to se-
lect SUBTITLE LANGUAG.
2 Click the thumb pad.
A subtitle language menu is displayed.
3 Move the thumb pad left or right to se-
lect the desired language.
4 Click the thumb pad.
A subtitle language is set.
# Pressing RETURN takes you back to the pre-
vious display.
Notes
! If the selected language is not recorded on
the disc, the language specified on the disc is
displayed.
! You can also switch the subtitle language dur-
ing playback with SUBTITLE. (Refer to Chan-
ging the subtitle language during playback
(Multi-subtitle) on page 29.)
! Even if you use SUBTITLE to switch the subti-
tle language, this does not affect the settings
here.
When you select OTHERS
When you select OTHERS, a language code
input display is shown. Refer to Language code
chart for DVD on page 90, use the number but-
tons to input the four digit code of the desired
language, and then move the thumb pad
right.
! Pressing CLEAR cancels the input num-
bers.
Setting the audio language
You can set the preferred audio language.
1 Move the thumb pad up or down to se-
lect AUDIO LANGUAGE.
2 Click the thumb pad.
An audio language menu is displayed.
3 Move the thumb pad left or right to se-
lect the desired audio language.
Operating this unit
En
47
Section
02
Operating
this
unit