Pioneer DVH-P5000UB - Manual (Page 77)

# When you select OFF in TA, you cannot select
FRONT-L.
# If a position other than FRONT-L or FRONT-R
is selected,
CHECK POSITION is displayed. To set
the position, refer to Using the position selector
on page 68.
2 Push MULTI-CONTROL left or right to
select the speaker to be adjusted.
FRONT-L (front speaker left)
—CENTER (center
speaker)
—FRONT-R (front speaker right)—
REAR-R (rear speaker right)
— REAR-L(rear
speaker left)
— SUB WOOFER(subwoofer)
# You cannot select speakers whose size is set
at
OFF. (Refer to Setting the speaker setting on
page 73.)
3 Push MULTI-CONTROL up or down to
adjust the distance between the selected
speaker and the listening position.
0.0 to 500.0 is displayed as the distance is in-
creased or decreased.
4 Press BAND to return to the ordinary
display.
Using the equalizer
The equalizer lets you adjust the equalization
to match the car
’s interior acoustic character-
istics as desired.
Recalling equalizer curves
There are seven stored equalizer curves which
you can easily recall at any time. Here is a list
of the equalizer curves.
Display Equalizer curve
POWERFUL Powerful
NATURAL Natural
VOCAL Vocal
FLAT Flat
Display Equalizer curve
CUSTOM 1 Custom 1
CUSTOM 2 Custom 2
SUPER BASS Super bass
! CUSTOM 1 and CUSTOM 2 are adjusted
equalizer curves.
! When FLAT is selected, no supplement or
correction is made to the sound. This is
useful to check the effect of the equalizer
curves by switching alternatively between
FLAT and a set equalizer curve.
% Press EQ to select the equalizer.
Press
EQ repeatedly to switch between the fol-
lowing equalizers:
POWERFUL
—NATURAL—VOCAL—FLAT—
CUSTOM 1
—CUSTOM 2—SUPER BASS
Adjusting 3-band parametric
equalizer
For CUSTOM 1 and CUSTOM 2 equalizer
curves, you can adjust the front, rear and cen-
ter equalizer curves separately by selecting a
center frequency, an equalizer level and a Q
factor for each band.
! A separate CUSTOM 1 curve can be cre-
ated for each source.
! A CUSTOM 2 curve can be created com-
mon to all sources.
! The center speaker largely determines the
sound image and getting the balance right
isn
’t easy. We recommend reproducing a 2-
ch. audio (a CD for example) and getting
the balance right among the speakers ex-
cept for the center, and then reproducing a
5.1-ch. audio (Dolby Digital or DTS) and ad-
justing the center speaker output to the
balance you have already got among the
other speakers.
Available accessories
En
77
Section
03
A
vailable
accessories