Bosch MUM6N10UC - Manual (Page 14)

14
Figure 5
Placing into Operation Dough Hook
Make sure that the power unit is on
a smooth, clean, suitable work surface
and switched to the Off position, O/Off".
Unwind the electrical cord to the necesĆ
sary length and plug into a convenient
outlet. The mixing bowl with dough hook
is now ready for operation. See table 1 for
examples demonstrating the use of the
dough hook attachment. Sample recipes
may also be found in the recipe section,
at the back of this manual.
How to Use Twin Beating
Whisks
All Bosch Universal Kitchen Machines
come with a twin beating whisk assembly,
see figure 4c. 6.
The twin beating whisks is intended to be
used for very light substances, such as
cream, egg whites, sauces, batters and
light pastry doughs that are thin enough to
pour.
The dough hook should be used for
all heavier substances such as cookie
doughs, yeast doughs, pastry doughs
and other heavy doughs. The dough hook
should always be used when adding nuts,
chocolate chips, dried fruits, hard butter
or other fats, hardened brown sugar, etc.
to a mixture.
Use of mixing bowl with twin beating
whisks
Before beginning to attach this or any
other attachment, make sure that the
power unit is on a smooth, clean, suitable
surface and switched to off position,
O/Off," and that you have moved the
motor drive cover.
1. Before using the mixing bowl and twin
beating whisk assembly for the first
time, it is recommended that the bowl,
splash ring, cover and twin beating
whisk assembly be washed. All
components of the mixing bowl and
the twin beating whisk assembly are
dishwasher safe.
2. If you have not already done so,
move the motor drive cover to the
highĆspeed drive.
The power unit does not start if the
motor drive cover is not on its
place.
3. Place the mixing bowl on the
highĆtorque drive of the power unit
and turn the bowl counterclockwise
with a slight downward pressure until
bowl is firmly seated, see figure 4a.
Failure to make sure that the bowl is
properly seated on the drive coupling
before the power unit is turned On can
result in damage to the bowl and/or
coupling.
4. Place and engage the twin beating
whisk assembly on the driveshaft of
the mixing bowl as shown in figure 6.
Make sure that the toothed wheel
interlocks with the drive shaft.
ATTENTION