Bosch MUM6N10UC - Manual (Page 24)

24
TROUBLESHOOTING
Problem Possible Cause and Remedy
The power unit does not
start if you use the bowl and
attachments.
The motor drive cover is not on the highĆspeed drive.
S Put the cover on its place.
The power unit stops while
working.
The safety coutout to protect the motor against
overheating has switched off the power unit.
S Turn the power unit to the Off" position 0/Off" and
unplug.
S Allow it to cool down for 15 minutes.
The blender does not work. The blender cover is not closed completely.
S Close the cover completely.
The blade has become blocked by the contents.
S Turn the power unit to the Off" position 0/Off" and
unplug. Remove the blender and pour the content
into a suitable container.
The blender stops while
working.
The blender jar or the blender cover is not attached
completely.
S Turn the blender jar /blender cover counterclockwise
until it is firmly seated.