B&K p/n 12698 - Manual (Page 12)

MAKING THE CONNECTION
It’s tempting to just plug in your new A/V System Controller and have great sound pour out. Before you do that,
take a few minutes to plan out how you want the A/V System Controller to fit into your audio/video system. Ask
yourself the following questions:
O What source components do I want to connect to my A/V System Controller? (CD, VCR, etc.)
O
What equipment will be receiving the audio and video? (TV monitor, Speakers, etc.)
The answers to your questions determine how many cables you need to connect to the back of the A/V System
Controller. Good preplanning equals great sound. Keep these recommendations in mind:
O
List all components in your system and indicate which jacks of the A/V System Controller each component will
be connected to. Your A/V System Controller has seven sets of inputs. It is convenient to connect a DVD
player to the input labeled DVD or a VCR to the input labeled V1 or TAPE, etc. However, your equipment may
differ from the labeling on the back of your A/V System Controller. In most cases you can connect any type of
source to any input (see FREQUENTLY ASKED QUESTIONS). For example, if you don’t have a satellite
receiver you can connect a DAT player or a second cassette deck to SAT. You can also reprogram the source
name that will appear on your A/V System Controller’s front panel and on-screen display (see SETUP -
SOURCE NAMES)
O
Also note the length of the cable for each component’s connection and describe how it should be routed or
draw your routing scheme below your list. You may want to label each cable with a name or number at both
ends. Use high quality connections to maintain high quality audio and video.
O
Think about the type and length of cable you need and obstacles in the cable’s path (doorways, furniture,
walkways, etc.).
To decide which ones are right for you talk to your dealer about the various cable products
that are available.
O
For safety, keep all cables out of high traffic areas (hallways or doorways) and away from equipment that
radiates power, including amplifiers, power cords, heaters, etc.
O
If you might expand your audio/video system later, keep these ideas in mind as you plan current cable runs.
O
To provide the best tuner reception, make sure the antenna is at least several feet away from the A/V System
Controller and any other equipment that may produce high frequency interference such as Personal
computers, CD players, halogen lamps, etc.
Take a look at the back panel of the A/V System Controller. You will notice that the RCA-type audio input and
output connectors are identified by colors, red for right channel and white for the left channel audio. Composite
video input and output connectors are identified by yellow. Coaxial digital inputs are identified by orange. The
surround outputs are identified by black.
10
p/n 12698 Rev. 9808B