B&K p/n 12698 - Manual (Page 34)

CHOOSING A SOURCE
In general, the selected source will appear at the ZONE 1 output, the TAPE output, and the V1 output. To prevent
feedback, TAPE input will not appear at TAPE output and V1 input will not appear at V1 output.
'9' 352 /2*,& DVD Source Composite Video
DVD PCM 2.0 Pro Logic
return control to A/V System Controller if desired AUDIO
select desired source - remote now controls source
U
(SOURCE) step to source desired source
Action From Front Panel From Remote
Note: if your source has separate ON and OFF control like your A/V System Controller, pressing the source button
will also turn on that source. If not, you will have to hit POWER while the remote is still set to the desired source.
TAPE MONITOR - If you have an analog three-head cassette or reel-to-reel analog tape recorder you may wish to
use TAPE MONITOR, which allows you to hear exactly what is on the tape as you are recording.
7$3( 352 /2*,& Tape Source S-Video
Analog 2.0 Pro Logic
select TAPE monitor
TAPE will appear on Z1 out (SOURCE) step quickly to TAPE TAPE
wait a few seconds while A/V System Controller
analyzes selected source
select desired source or TUNER
source will appear on TAPE and V1 outs (SOURCE) step to source desired source
Action From Front Panel From Remote
Note: The tape monitor loop only allows recording of analog inputs. If you simply choose the source you wish to
tape without then selecting TAPE MONITOR then you can make analog recordings of digital inputs as well as
analog inputs.
TUNER OPERATION
)0 67  &+ 
FM St 96.9 Composite Video
Ch 10 Pro Logic
set FM stereo/mono ↵
(ENTER) SEL or ENTER 6
manually tune frequency VOLUME KNOB TUNE+ or TUNE- 5
change to another channel
see AM/FM TUNER SETTING for SEEK/TUNE
∧
(UP) or
∨
(DOWN) CHAN
∧
or CHAN
∨
4
select AM or FM BAND 3
select TUNER TUNER 2
make sure remote is in AUDIO mode
U
(SOURCE) step to AM or FM AUDIO 1
Action From Front Panel From Remote
Note: the front panel VOLUME KNOB controls frequency for a few seconds after changing tuner channel.
SEL or ENTER will control stereo/mono selection for a few seconds after changing channel or frequency.
32
p/n 12698 Rev. 9808B