B&K p/n 12698 - Manual (Page 19)

SETUP
For best results, perform the following set up procedure when you initially install your A/V System Controller and
anytime you change or add sources, speakers, etc. or when you rearrange your listening area
THE MENU SYSTEM
Setup of your A/V System Controller will require you to navigate through the menu system. We recommend that
you use a video monitor connected to the zone 1 output along with the remote control provided with your A/V
System Controller. It is also possible to set up your A/V System Controller from the front panel. Do not leave your
video monitor on with the A/V System Controller in the menu system for long periods of time. This can result in
permanently burning the menu display into your monitor’s screen. This would take several hours so there is no
danger of it happening during normal setup procedures. The following are general instructions for using the menu
system. A complete guide to the menu system is included at the back of this manual.
MENU - If you are not already in the menu system, the MENU button will activate the menu system. Once you are
in the menu system, the MENU button will return you to the next higher level menu or, if you are already at the
highest level, it will exit from the menu system.
UP/DOWN ARROWS - Once you are in the menu system, use the UP/DOWN ARROWS to move to the desired
menu selection. The currently active menu line is highlighted in a contrasting color.
SEL (remote) or ENTER (remote or front panel) - Some menu selections cause another menu to be activated.
Use the UP/DOWN ARROWS to move to the desired menu line. Pressing SEL or ENTER will activate the next
menu.
NUMERIC KEYS (remote only) - From the remote control you may also go directly to a menu line by typing the
corresponding line number. If there is another menu below that line it will be activated immediately (no ENTER
required).
LEFT/RIGHT ARROWS (remote) or VOLUME KNOB (front panel) - Some menu selections allow you to change
one of the A/V System Controller settings. Use the UP/DOWN ARROWS to move to the desired menu line.
Pressing the LEFT/RIGHT ARROWS will change the setting. There are no LEFT/RIGHT ARROWS on the front
panel. While in the menu system, the VOLUME KNOB acts as the LEFT/RIGHT ARROWS. This means that you
will not be able to adjust the volume from the front panel while in the menu system. The remote control volume will
work in most menus.
TEXT EDITING - some menu selections will require you to edit text. Use the UP/DOWN ARROWS to change the
current (blinking) character. Use the LEFT/RIGHT ARROWS (or VOLUME KNOB) to move to another character
position.
HELP SCREENS - The MAIN MENU provides a HELP GUIDE that summarizes these instructions. Specific help is
also provided at the bottom of every menu. The MAIN MENU also provides a PRODUCT INFORMATION screen
that provides basic information on your A/V System Controller. These screens will automatically scroll through
each line.
UNIVERSAL REMOTE - Remember that when you press a source button (DVD, CD, etc.) the remote now
controls the selected device. To return control to your A/V System Controller, you must press AUDIO. ALWAYS
check that your remote is set to AUDIO before attempting to control your A/V System Controller. AUDIO
will be displayed in the remotes LCD window.
17
p/n 12698 Rev. 9808B