Sing, Onnect, Can to connect readers – Baracoda Bluetooth Headset User Manual
Page 14: Using connect&scan to connect readers
BaracodaManager for PC – User Guide v3.39
- 14 -
Data Capture
for Workforce
in Motion
-
the BaracodaManager searches for all discoverable barcode reader(s) not previously
configured (which are in the Bluetooth radio range and are in listening mode). This is true
when there are no configured readers in the “My Paired Devices” list.
3.2.
Using Connect&Scan to connect readers
To configure the barcode reader(s):
1. Turn on the barcode reader(s) and the computer on which the BaracodaManager has been installed.
2. Make sure that the Bluetooth stack on the PC is from Microsoft
3. Double-click the BaracodaManager icon in the system tray (if you do not find the BaracodaManager
icon, start the BaracodaManager). The BaracodaManager window appears.
4. Make sure that there are no more than 6 readers in the My Paired Devices, otherwise it will not be
possible to show the connect barcode.
5. Click the Automatic connection button in order to show the connect barcode
6. Scan the connect barcode with the reader