Baracoda Bluetooth Headset - Manual (Page 46)

BaracodaManager for PC – User Guide v3.39 - 46 -
Data Capture
for Workforce
in Motion
12.
Baracoda DualRunners settings
The Settings window displays nine buttons and six groups:
- General information
- Current Operating Mode information
- Shutdown Timer information
- Battery
- Data capture mode
- Other Settings
The following two tables show the General information fields:
Field Functionality
Application Version of embedded Baracoda software
Name Bluetooth name of the barcode reader
RFID Version of the RFID engine
The table below shows the user the Operating Mode options that they can set:
Field Functionality
Batch Set the batch mode: scanned barcodes are stored in non-volatile memory and
can be uploaded to the application later (click on “Batch config” for more
advanced settings)
Real time Set the Real-time mode: scanned barcodes are transmitted to the application
immediately when the Bluetooth radio connection is active. If the connection
is not established the barcodes are lost, unless “Enable Buffering” is set (see
below).
Master Set the Master mode: The barcode reader automatically creates connection
to the specified Host device when the user scans a barcode. Then the reader
works as in real time mode.
Host addr. For use in Master mode : Set, in the address field, the Bluetooth address of
the host device the reader has to connect to.