Baracoda Bluetooth Headset - Manual (Page 64)

BaracodaManager for PC – User Guide v3.39 - 64 -
Data Capture
for Workforce
in Motion
16.
IdBlue settings
The Settings window displays eight buttons and five groups:
- General information
- Disconnected Mode information
- Shutdown Timer information
- RF Protocol
- Battery
- Other Settings
The following two tables show the General information fields:
Field Functionality
Decoder Version of embedded Baracoda software
Name Bluetooth name of the barcode reader
The table below shows the user the Disconnected Mode options that they can set:
Field Functionality
Batch Set the batch mode: tags read when the reader is disconnected are stored in
non-volatile memory and can be uploaded to the application later (click on
“Batch config” for more advanced settings)
No batch Set the no batch mode: tags read when the reader is disconnected are lost.
The following table shows the Shutdown Timer fields that you can set:
Field Functionality
Device shutdown Set the delay (in minutes) after which the barcode reader switches off
without any activity.
RFID shutdown Set the delay (in seconds) that the reader allocates for the user to read an
RFID tag after the reader button has been pressed.
The following table shows the RF Protocol field:
Field Functionality
None Disable the engine reading RFID tags.
ISO 156693 Only ISO tags will be read.
Tag-IT HF Only IT HF tags will be read.