Baracoda Bluetooth Headset - Manual (Page 47)

BaracodaManager for PC – User Guide v3.39 - 47 -
Data Capture
for Workforce
in Motion
The following table shows the Shutdown Timer fields that you can set:
Field Functionality
When connected Set the delay (in minutes) after which the barcode reader switches off, when
the barcode reader is connected and without any activity.
When not connected Set the delay (in minutes) after which the barcode reader switches off, when
the barcode reader is not connected and without any activity.
The following table shows the Battery field:
Field Functionality
Battery Battery level (0-100%) and its current charging status.
The following table shows the Other Settings buttons that you can set:
Button Functionality
Product Access product settings (see below)
Bluetooth Access Bluetooth connection settings (see below)
Symbology Access types of barcodes settings (see below)
RFID options Access RFID settings
Signature/image
configuration Access the signature mode and picture mode configuration (only for 2D
readers with firmware version >= 1.47, see below)
The table below shows the actions you can take with the Data capture mode radio buttons:
Button Functionality
Both Activates both the barcode scan engine and the RFID engine.
RFID Activates the RFID engine and turns off the barcode scan engine.
Barcode Activates the barcode scan engine and turns off the RFID engine.
The table below shows the actions you can take with the buttons:
Button Functionality
Cancel Close window with no changes.
Save Store and send the new parameters to the barcode reader.
Default Settings Restore the factory settings. The barcode reader (flash) memory is erased and
the factory default parameters are restored. Check the device manual for
details.
Upgrade Ugrade the reader’s firmware. Please check Chapter 16 for details.