Baracoda Bluetooth Headset - Manual (Page 32)

BaracodaManager for PC – User Guide v3.39 - 32 -
Data Capture
for Workforce
in Motion
9.2. Product settings
To find out more about the product settings, please refer to the barcode reader User Manual.
9.3. Bluetooth settings
To find out more about the Bluetooth settings, please refer to the barcode reader User Manual.
Check the box
to activate
Baracoda
Header
Check the boxes
to activate
prefix/suffix
Check the box to
Activate no data loss
mode
(acknowledgement)
When Prefix/Suffix
box is checked,
select Data format
(ASCII or Hex)
and type values in
active fields.
Check the box
to activate
timestamp
Configure the number
of barcodes (0 or
MAX) that are
buffered by the
reader (real time
mode, reading
barcodes while
disconnected)
Check the box
to activate
beep when a
barcode is
decoded
Select beep
volume (high or
low)
Select to
activate
autoscan
mode of
the scan
engine
Select max BT
power allowed by
law in your country.
Check the box to
activate PIN code
authentication
Select the duration
of Sniff period
Reader’s PIN code,
used when Security
is enabled
Check the box to
invert the LED
(connection /
operating mode
indication)
Select to
disable the
scan engine
Select to
activate
smart
autoscan
mode of
the scan
engine
Check the box to
activate beep when
a barcode is
acknowledged by
the host PC (when
No data loss mode is
active)
Select to
activate trigger
mode of the
scan engine
(default)