Baracoda Bluetooth Headset - Manual (Page 61)

BaracodaManager for PC – User Guide v3.39 - 61 -
Data Capture
for Workforce
in Motion
15.
Baracoda ToughRunners and ScanWear settings
The Settings window displays eight buttons and five groups:
- General information
- Current Operating Mode information
- Shutdown Timer information
- Battery
- Other Settings
The following two tables show the General information fields:
Field Functionality
Decoder Version of embedded Baracoda software
Name Bluetooth name of the barcode reader
Radio Version of Bluetooth radio
Boot Version of bootloader
The table below shows the user the Operating Mode options that they can set:
Field Functionality
Real time Set the Real-time mode: scanned barcodes are transmitted to the application
immediately when the Bluetooth radio connection is active. If the connection
is not established the barcodes are lost, unless “Enable Buffering” is set (see
below).
Master Set the Master mode: The barcode reader automatically creates connection
to the specified Host device when the user scans a barcode. Then the reader
works as in real time mode.
Host addr. For use in Master mode : Set, in the address field, the Bluetooth address of
the host device the reader has to connect to.
The following table shows the Shutdown Timer fields that you can set:
Field Functionality
Shutdown timer Set the delay (in minutes) after which the barcode reader switches off
without any activity.
The following table shows the Battery field:
Field Functionality
Battery Battery level (OK or low).