AEM 30-6905 Universal Programmable EMS-4 - Manual (Page 100)

Page 100 of 279 EMS-4 Install and Tuning Guide_Rev 1.6
Calibration Setup
Base Calibrations
There are several base calibrations that can be used as a starting point. They are installed with
the software and located here:
C:\Program Files\AEM\AEMTuner\Calibrations\AEM Updates\EMS4
AEM is constantly adding to, updating and improving the base calibration library. Go to the File
menu and select
Calibration Notes… for information on each file. Example shown below: