AEM 30-6905 Universal Programmable EMS-4 - Manual (Page 57)

Page 57 of 279 EMS-4 Install and Tuning Guide_Rev 1.6
GPIO General Purpose Activation
To activate an output for a General Purpose Function, double click on the output function
row/column cell adjacent to the output name as shown. Select General Purpose from the drop
down list then hit the ENTER key to confirm.
Output Activation Criteria
Under Pin Configuration, check the Enable Pin box to activate the output. The Switch Input
drop down selection allows the user to select a switch input to manually activate the output.
Note that the general pin conditions must also be met in addition to the switch input status for