AEM 30-6905 Universal Programmable EMS-4 - Manual (Page 83)

Page 83 of 279 EMS-4 Install and Tuning Guide_Rev 1.6
To modify table data, left click and drag to select the cells you want to change. Add or subtract
from the existing value using the + and
– keys. Holding the CNTRL key down will create larger
changes.
Table Editing with Right Click Menu
Percent Change – (hotkey E) applies a
percentage offset to the value(s). Note that
the percentage calculation type is a user
preference.
Set Value – Replaces the existing value(s)
with the new one entered.
Add Value – Adds an offset to the existing
value(s)
Interpolate Horizontally - Uses the first and
last cells selected in the direction of