AEM 30-6905 Universal Programmable EMS-4 - Manual (Page 50)

Page 50 of 279 EMS-4 Install and Tuning Guide_Rev 1.6
Upload Calibration Dialog
Click the Browse button to select a calibration file. Note that the calibration firmware version
must match the EMS firmware version. The current EMS version is displayed at the top of this
window. An optional check box labeled Download EMS
‟s Calibration First allows the currently
loaded calibration file to be saved prior to loading the new one. When the desired calibration file
is chosen, click on the Go button to load it into the EMS. Follow the on-screen instructions and
cycle power afterwards.
Set Password – Allows the user to define a password for the EMS calibration. Must be
connected to an EMS for this function to become available.