Editing 3d map displays – AEM 30-6905 Universal Programmable EMS-4 User Manual
Page 90
Page 90 of 279 EMS-4 Install and Tuning Guide_Rev 1.6
Select the desired channel then click the column next to each property to edit the settings.
Decimal Places
– Specifies how many digits after the decimal point
Display Name
– Alternative user defined name for the channel
Display Type
– How to display the data – numeric value, bar graph or both
High Warning Value
– Channel display will turn red when above this value
Live ECU Refresh Rate
– Controls how often the channels value is refreshed from the ECU
when connected
Low Warning Value
– Channel display will turn red when below this value
Maximum Value
– The maximum value the channel displays
Minimum Value
– The minimum value the channel displays
Editing 3D Map Displays
Table Display Toolbar Icon Function