AEM Infinity Supported Applications - Ford Coyote Engine with Ford Racing Control Pack - Manual (Page 25)

Infinity Supported Application 25
© 2014 AEM Performance Electronics
Infinity
Pin
Infinity Assignment
Pin
Destination
Ford Coyote with FR
Control Pack
Description
Infinity Hardware
Specification
Notes
C1-10 +12V_R8C_CPU
Ford Racing
PCM70-62
KAPWR / 12VHAAT
Dedicated power
management CPU
Full time battery power. MUST be
powered bef ore the ignition switch
input is triggered. (See C1-65.)
C1-11 Coil 4
Engine
E-50
Coil on Plug Assembly 4
(COP4C)
25 mA max source
current
0–5V Falling edge f ire. DO NOT
connect directly to coil primary .
Must use an ignitor OR CDI that
accepts a FALLING edge f ire
signal.
C1-12 Coil 3
Engine
E-18
Coil on Plug Assembly 3
(COP3F)
25 mA max source
current
0–5V Falling edge f ire. DO NOT
connect directly to coil primary .
Must use an ignitor OR CDI that
accepts a FALLING edge f ire
signal.
C1-13 Coil 2
Engine
E-52
Coil on Plug Assembly 2
(COP2H)
25 mA max source
current
0–5V Falling edge f ire. DO NOT
connect directly to coil primary .
Must use an ignitor OR CDI that
accepts a FALLING edge f ire
signal.
C1-14 Coil 1
Engine
E-70
Coil on Plug Assembly 1
(COP1A)
25 mA max source
current
0–5V Falling edge f ire. DO NOT
connect directly to coil primary .
Must use an ignitor OR CDI that
accepts a FALLING edge f ire
signal.
C1-15 Coil 6
Engine
E-69
Coil on Plug Assembly 6
(COP6E)
25 mA max source
current
0–5V Falling edge f ire. DO NOT
connect directly to coil primary .
Must use an ignitor OR CDI that
accepts a FALLING edge f ire
signal.
C1-16 Coil 5
Engine
E-34
Coil on Plug Assembly 5
(COP5B)
25 mA max source
current
0–-5V Falling edge f ire. DO NOT
connect directly to coil primary .
Must use an ignitor OR CDI that
accepts a FALLING edge f ire
signal.
C1-17 LowsideSwitch_2
Ford Racing
PCM70-18
Fan Relay Control
Lowside switch, 4A max,
NO internal f ly back
diode.
See Setup Wizard Page 'LowSide
Assignment Tables' f or
conf iguration options. See 2D table
'LS5_Duty [%]' f or activ ation
settings. See Setup Wizard page
'User GPOs' f or def ault activ ation
criteria.
C1-18 LowsideSwitch_3
Engine
E-02
Variable Camshaf t
Timing 11 Solenoid
(Passengerside Intake)
Lowside switch, 4A max
with internal f ly back
diode. Inductiv e load
should NOT hav e f ull
time power.
See Setup Wizard Page 'LowSide
Assignment Tables' f or
conf iguration options. See 2D table
'LS3_Duty [%]' f or activ ation
settings. See Setup Wizard page
'VVC' f or options.
C1-19 AGND_1
Ford Racing
PCM70-02
IAT
Sensor Ground
Dedicated analog ground Analog 0–5V sensor ground
C1-20 AGND_1
Engine
E-32
Digital Cams Ground (E-
SIGRTN)
Dedicated analog ground Analog 0–5V sensor ground