AEM Infinity Supported Applications - Ford Coyote Engine with Ford Racing Control Pack - Manual (Page 35)

Infinity Supported Application 35
© 2014 AEM Performance Electronics
Infinity
Pin
Infinity Assignment
Pin
Destination
Ford Coyote with FR
Control Pack
Description
Infinity Hardware
Specification
Notes
C2-50 +12V_R8C_CPU --- Battery Perm Power
Dedicated power
management CPU
Optional f ull time battery power.
MUST be powered bef ore the
ignition switch input is triggered.
(See C1-65.)
C2-51 Coil 7
Engine
E-33
Coil on Plug Assembly 7
(COP7G)
25 mA max source
current
0–5V Falling edge f ire. DO NOT
connect directly to coil primary .
Must use an ignitor OR CDI that
accepts a FALLING edge f ire
signal.
C2-52 Coil 8
Engine
E-51
Coil on Plug Assembly 8
(COP8D)
25 mA max source
current
0–5V Falling edge f ire. DO NOT
connect directly to coil primary .
Must use an ignitor OR CDI that
accepts a FALLING edge f ire
signal.
C2-53 Coil 9 --- Coil 9
25 mA max source
current
0–5V Falling edge f ire. DO NOT
connect directly to coil primary .
Must use an ignitor OR CDI that
accepts a FALLING edge f ire
signal.
C2-54 Coil 10 --- Coil 10
25 mA max source
current
0–5V Falling edge f ire. DO NOT
connect directly to coil primary .
Must use an ignitor OR CDI that
accepts a FALLING edge f ire
signal.
C2-55 HighsideSwitch_2
User Mod.
Fuel Pump
Control
(C47-01
Green w/
Black Stripe
wire);
See Page
5–6.
Fuel Pump
Multi-f unction pin
depending on hardware
conf iguration
See Setup Wizard page 'HighSide
Assignment Tables' f or
conf iguration options. See 2D
lookup table 'HS1_Table' f or
activ ation settings. See Setup
Wizard page 'User GPOs' f or
def ault activ ation criteria.
C2-56 Not used Not used Not used Not used
Ford Pin Numbering
Ford Coyote PCM Connectors View ed from Wire Side