AEM Infinity Supported Applications - Ford Coyote Engine with Ford Racing Control Pack - Manual (Page 28)

28
© 2014 AEM Performance Electronics
Infinity
Pin
Infinity Assignment
Pin
Destination
Ford Coyote with FR
Control Pack
Description
Infinity Hardware
Specification
Notes
C1-40 Analog_In_12 --- Mode Switch
12 bit A/D, 100K pullup to
5V
0–5V analog signal. Use +5V Out
pins as power supply and Sensor
Ground pins as the low ref erence.
Do not connect signals ref erenced
to +12V as this can permanently
damage the ECU.
See the 1D lookup table
'ModeSwitch' f or input state.
A multi-position rotary switch such
as AEM P/N 30-2056 is
recommended.
Also assignable to multiple
f unctions. See Setup Wizard f or
details.
C1-41 +5V_Out_1
Engine
E-09
'Electronic Throttle
Control (ETCREF)
Regulated, f used +5V
supply f or sensor power
Analog sensor power
C1-42 +5V_Out_1 --- +5V Out
Regulated, f used +5V
supply f or sensor power
Analog sensor power
C1-43 HighsideSwitch_1 --- HS1 (switched 12V)
0.7A max, High Side
Solid State Relay
See Setup Wizard page 'HighSide
Assigment Tables' f or conf iguration
options. See 2D lookup table
'HS1_Table' f or activ ation settings.
C1-44 HighsideSwitch_0 --- VTEC
0.7A max, High Side
Solid State Relay
See Setup Wizard page 'HighSide
Assigment Tables' f or conf iguration
options. See 2D lookup table
'HS0_Table' f or activ ation settings.
See Setup Wizard page 'Honda
VTEC' f or def ault activ ation
criteria.
C1-45
Crankshaf t Position
Sensor VR+
Engine
E-13
Crankshaf t Position
(CKP+)
Dif f erential Variable
Reluctance Zero Cross
Detection
See Setup Wizard page 'Cam/
Crank' f or options.
C1-46
Crankshaf t Position
Sensor VR-
Engine
E-12
Crankshaf t Position
Sensor (CKP-)
C1-47
Camshaf t Position
Sensor 1 VR-
Engine
E-29
VR Reluctance Sensor
(VRSRTN)
Dif f erential Variable
Reluctance Zero Cross
Detection
See Setup Wizard page 'Cam/
Crank' f or options.
C1-48
Camshaf t Position
Sensor 1 VR+
Engine
E-46
Camshaf t Position Bank
1 In (Passengerside
Exhaust) (CMP12)
C1-49 VR+_In_2
Engine
E-47
Camshaf t Position Bank
2 In (Driv erside Exhaust)
(CMP22) Dif f erential Variable
Reluctance Zero Cross
Detection
See Setup Wizard page 'Cam/
Crank' f or options.
C1-50 VR-_In_2
Engine
E-48
Variable Reluctance
Sensor (VRSRTN2)
C1-51 VR-_In_3 ---
Driv en Lef t Wheel Speed
Sensor -
Dif f erential Variable
Reluctance Zero Cross
Detection
See 'Driv en Wheel Speed
Calibration' in the Setup Wizard
'Input Function Assignment' page.