AEM Infinity Supported Applications - Ford Coyote Engine with Ford Racing Control Pack - Manual (Page 8)

8
© 2014 AEM Performance Electronics
Variable Valve Control (VVC)
The AEM Infinity system supports Fords Coyote’s Variable Valve Control. The base calibration is
configured with base VVC settings that may need adjustment.
For proper VVC function, the user must sync the cam timing by following the instructions listed in Setup
Wizard: Wizards>Setup Wizard>VVC>VVC Cam Sync.
VVC to Cam correlation is as follows:
Cam 0 = VVC2A – CMP 12
Cam 1 = VVC2B – CMP 22
Cam 2 = VVC1A – CMP 11
Cam 3 = VVC1B – CMP 21
FORD RACING CONTROL PACK HARNESS MODIFICATIONS
(OPTIONAL)
Fuel Pump Flying Lead
To allow the Infinity to control the fuel pump a modification must be made to the C47 flying lead
connector.
The Green w/ Black stripe wire is the Highside Fuel Pump relay control wire (C47-01). The Ford Racing
harness double crimps 12V Start & Run (C47-03 ISP-R) to this fuel pump highside so that the fuel pump
is running when the key is on.