Infinity supported application 31 – AEM Infinity Supported Applications - Ford Coyote Engine with Ford Racing Control Pack User Manual

Page 31

Advertising
background image

Infinity Supported Application

31

© 2014 AEM Performance Electronics

Infinity

Pin

Infinity Assignment

Pin

Destination

Ford Coyote with FR

Control Pack

Description

Infinity Hardware

Specification

Notes

C2-7

Injector 10

---

Injector 10

Saturated or peak and

hold, 3A max continuous

Injector 10

C2-8

Power Ground

Ford Racing

PCM70-50

Case Ground

Power Ground

Connect directly to battery ground.

C2-9

+12V

Ford

Racing

PCM70-68

VPWR

12 v olt power f rom relay

12 v olt power f rom relay . Relay
must be controlled by +12V Relay
Control signal, pin C1-29 abov e.

C2-10

Injector 11

---

Injector 11

Saturated or peak and

hold, 3A max continuous

Not used

C2-11

Injector 12

---

Injector 12

Saturated or peak and

hold, 3A max continuous

Not used

C2-12

Analog_In_17

---

A/C Analog Request

12 bit A/D, 100K pullup to

5V

0–5V analog signal. Use +5V Out
pins as power supply and Sensor
Ground pins as the low ref erence.
Do not connect signals ref erenced
to +12V as this can permanently
damage the ECU. See Setup
Wizard 'Input Functions' page f or
input selection. See
AC_Request_In 1-axis table f or
activ ation logic.

C2-13

Analog_In_18

Ford Racing

PCM70-28

DBW_APP1 [%]

12 bit A/D, 100K pullup to

5V

0–5V analog signal. Use +5V Out
pins as power supply and Sensor
Ground pins as the low ref erence.
Do not connect signals ref erenced
to +12V as this can permanently
damage the ECU.

C2-14

Analog_In_19

Ford Racing

PCM70-29

DBW_APP2 [%]

12 bit A/D, 100K pullup to

5V

0–5V analog signal. Use +5V Out
pins as power supply and Sensor
Ground pins as the low ref erence.
Do not connect signals ref erenced
to +12V as this can permanently
damage the ECU.

C2-15

Analog_In_Temp_4

---

Charge Out Temperature

12 bit A/D, 2.49K pullup

to 5V

See ChargeOutTemp [C] table f or
calibration data and
ChargeOutTemp [C] f or channel
data.

C2-16

Analog_In_Temp_5

---

Airbox Temperature

12 bit A/D, 2.49K pullup

to 5V

See AirboxTemp [C] table f or
calibration data and AirboxTemp
[C] f or channel data.

C2-17

Analog_In_Temp_6

---

Fuel Temperature

12 bit A/D, 2.49K pullup

to 5V

See FuelTemp [C] table f or
calibration data and FuelTemp [C]
f or channel data.

Advertising