JLG 3246E2 ANSI Parts Manual - Manual (Page 10)

1-4 3120738
SECTION 1 FRAME
S
E
C
T
I
O
N
1
F
R
A
M
E
103 (cont’d) 7021312 Seal, Shaft Oil (Inner Seal) 1
7021317 Seal, Dust (Outer Seal) 1
3160269 (S/N 90870 to Present) (See Figure 1-2 for Breakdown)
104 3300255 Nut, Wheel 10
105 See Note Nut (Note: See Breakdown of Individual Motor) 2
106 Hardware Options: 8
3271805 Locknut 1/2”-13NC (Grade 8) (Prior to S/N 49303)
3311801 Nut 1/2”-13NC (S/N 49303 to S/N 84080)
3300450 Nut 1/2”-13NC (S/N 84080 to Present)
107 3450406 Pin, Cotter 1/8” x 1 1/2” 2
108 Use 4740453 Flatwasher 1/2” Narrow
(Was P/N 4891800 Prior to S/N 90870) 8
109 4761800 Lockwasher 1/2” (S/N 49303 to S/N 84080) 8
110 0100019 Loctite #271 (Prior to S/N 84080) A/R
TIRE AND WHEEL INSTALLATIONS Ref.
0258167 Black Tire and Wheel Installation Ref. 1
0258166 Gray Non-Marking Tire and Wheel Installation Ref. 1
201 Tire Options: 4
4860180 Standard Black A/R
4860182 Non-Marking Gray A/R
FRAME OPTIONS 1
2360459 ANSI Machines (Prior to S/N 50363)
2360482 ANSI Machines (S/N 50363 to Present)
2360482 CSA Spec Machines
FIGURE 1-1. WHEEL DRIVE AND STEERING INSTALLATION - 1532E2 & 1932E2 (CONTINUED)
FIG & ITEM # PART NUMBER DESCRIPTION QTY. REV.