JLG 3246E2 ANSI Parts Manual - Manual (Page 224)

10-4 3120738
SECTION 10 SPECIAL OPTIONS
S
E
C
T
I
O
N
1
0
S
P
E
C
I
A
L
O
P
T
I
O
N
S
PLATFORM HANDRAILS AUTOLOCK KIT - 2032E2
& 2646E2 Ref.
2901766 Fixed Rails Ref.
2901767 Folddown Rails Ref.
0257975 PRESSURE CHECKS INSTALLATION (JAPANESE
SPEC WITH STANDARD CONTROLS) Ref.
0258154 PRESSURE CHECKS INSTALLATION (JAPANESE
SPEC WITH PROPORTIONAL CONTROLS) Ref.
0257946 PLATFORM RAIL SPACERS INSTALLATION -
2032E2 (CALIFORNIA SPEC) Ref.
SPEED SWITCH INSTALLATION
(JAPANESE TAIYO SPEC) Ref.
0270380 2032E2 (Mounted on Center Left Side of Frame) Ref.
0270393 2646E2 (Mounted on Center Right Side of Frame) Ref.
Switch, Limit Options: 1
4360401 2032E2
4360437 2646E2
Bracket, Mounting Options: 1
0902666 2032E2
0902537 2646E2
Cover, Bracket Options: 1
Not Required 2032E2
0902632 2646E2
TOOLS FOR SERVICE Ref.
7002821 Crimper (For Wire to Pin/Socket Connections) 1
7002823 Extractor (For Removal of Pin/Socket from Connec-
tors) 1
4460467 Extractor, Pin (Blue 16-18 Gauge) (For Removal of
Pin/Socket from Connectors) 1
4460510 Extractor, Pin (Yellow 12-14 Gauge) (For Removal of
Pin/Socket from Connectors) 1
7002828 Stripper, Wire 1
TRAY LANYARD INSTALLATIONS Ref.
0272171 1532E2/1932E2 Ref.
0272218 2032E2 Ref.
0272219 2646E2/3246E2 Ref.
WELDER, 12-40 VOLT MIG (S/N 105296 to Present) Ref.
0273501 2032E2 A
0272149 2632E2 / 2646E2 D
0272091 3246E2 1
Note: This list is to accomodate machines ordered with special equipment. Options may not
be applicable to all models. For more specific parts information contact JLG Parts Department.
FIG & ITEM # PART NUMBER DESCRIPTION QTY. REV.