JLG 3246E2 ANSI Parts Manual - Manual (Page 80)

3-8 3120738
SECTION 3 SCISSOR ARMS
S
E
C
T
I
O
N
3
S
C
I
S
S
O
R
A
R
M
S
30 Cable, Electrical - 18/2 Options:
1060680 Prior to S/N 50027 15ft/4.06m
1060680 S/N 50027 to Present 21ft/6.40m
31 1100105 Cam, Activator 1
32 1683603 Lift Cylinder Assembly (See Section 5 for Breakdown) 1
33 Nut Options: 2
3311005 Locknut #10-24NC (Prior to S/N 50027)
3310801 Nut #8-32NC (S/N 50027 to Present)
34 3311501 Nut 5/16”-18NC 4
35 Locknut Options: 8
3311505 Locknut 5/16”-18NC (Prior to S/N 50027)
3311605 Locknut 3/8”-16NC (S/N 50027 to Present)
36 Not Used
37 3422641 Pin, Pivot 2
38 3422642 Pin, Headed (Prior to S/N 50027) 2
39 Pin, Pivot Options: 6
3422644 Prior to S/N 50027
3422746 S/N 50027 to Present
40 Pin, Pivot Options: 14
3422663 Prior to S/N 50027
3422743 S/N 50027 to S/N 82160
3422882 S/N 82160 to Present
41 Pin, Pivot Options: 2
3422671 Prior to S/N 50027
3422742 S/N 50027 to S/N 82160
3422862 S/N 82160 to Present
42 Pin, Pivot Options: 2
3422725 Prior to S/N 50027
3422747 S/N 50027 to Present
43 Not Used
44 3450804 Pin, Cotter 1/4” x 1” 2
45 3760387 Ring, Retaining 8
46 3841344 Rod, Retaining 2
47 Roller Options: 2
3860078 Prior to S/N 82160
3860092 S/N 82160 to Present
48 Screw Options: 2
3931024 Screw, Socket Head #10-24NC x 1 1/2”
(Prior to S/N 50027)
3930820 Screw, Socket Head #8-32NC x 1 1/4”
(S/N 50027 to S/N 111642)
3900329 Screw, Socket Head #8-32NC x 1 1/2”
49 Switch, Limit Options: 1
4360401 Prior to S/N 50027
4360548 S/N 50027 to Present (was p/n 4360321)
50 4420062 Tape, UHMW 5in/12cm
51 Connector, Strain Relief Options: 2
Use 4460662 1/2” Pipe Threads (Was P/N 4460049)
4460662 1/2” Pipe Threads (Used on Limit Switch p/n 4360321)
FIGURE 3-2. SCISSOR ARMS INSTALLATION - 1932E2 (CONTINUED)
FIG & ITEM # PART NUMBER DESCRIPTION QTY. REV.