JLG 3246E2 ANSI Parts Manual - Manual (Page 137)

3120738 4-39
SECTION 4 PLATFORM
S
E
C
T
I
O
N
4
P
L
A
T
F
O
R
M
FIGURE 4-10. CONTROLLER ASSEMBLY (STANDARD CONTROLS MACHINES)
FIG & ITEM # PART NUMBER DESCRIPTION QTY. REV.
CONTROLLER ASSEMBLIES
1600268 PRIOR TO S/N 59220 - Stamped ID # Ending with
1619 Ref. A
1600295 S/N 59220 TO PRESENT - Stamped ID # Ending with
1676 Ref. C
7011990 Mechanical Assembly (Prior to S/N 59220) 1
7020521 Mechanical Assembly (S/N 59220 to Present) 1
1 Not Serviced Handle Assembly 1
1A Use 7020520 Boot (was p/n 7003778) 1
1B 7020502 Gasket 1
1C Holder, Magnet Options (Not Shown): A/R
Not Required Prior to S/N 59220 0
7020522 S/N 59220 to Present 1
2 7011991 Grip Assembly 1
2A 7020500 Switch, Rocker 2
7020505 Switch, Separator 1
2B 7020501 Switch, Push Button - Red 1
2C
Use 7020541
Grip - Right Half (was p/n
7011993 & p/n
7020531)
1
2D 7011996 Pin, Grooved 1
2E
Use 7020541
Grip - Left Half (was p/n
7011994 & p/n
7020532)
1
2F 7003791 Actuator, Switch 1
2G 7011997 Trigger 1
2H 7011998 Screw 4
2J 7003790 Cap, Rubber 1
Note: p/n 7020541 Includes Items 2C & 2E
With a JLG Logo. Ref.
3 Electrical Assembly Options: 1
7011999 Prior to S/N 59220
7020523 S/N 59220 to Present
4460265 Connector, Receptacle - 9 Pin (Not Shown) 1
4460268 Socket (Not Shown) 9
3A Switch, Rocker Options: A/R
Use 7016362 Prior to S/N 59220 (was p/n 7003714) 3
Not Available S/N 59220 to Present 1
4 Not Serviced Plate Assembly 1
5 Magnet Options (Not Shown): A/R
Not Required Prior to S/N 59220 0
7020524 S/N 59220 to Present 2
6 7011987 Spring (Not Shown) 1